Sculptural From All Sides: 1963-65

From the beginning of Stage Two, the construction of the vaulted shells, Sydneysiders began to get a sense of the iconic structure that would emerge into the symbol of modern Australia.

Construction of the side shells under the arms of the Babcock-Weitz G 280 B cranes (1964) by Max Dupain, State Library of New South WalesSydney Opera House

With the podium of the building complete, the construction of the superstructure – or roof – of the Sydney Opera House began in 1963, described as Stage Two of the project.

Space-age forms began to develop from the already sculptural appearance of the site and, because it was exceptionally photogenic, artists were drawn to Bennelong Point to document progress. The spectacle evoked a reverence and even awe more commonly associated with a cathedral.

A worker clambers over a pedestal mould (1964) by Max Dupain, State Library of New South WalesSydney Opera House

Workers onsite creating formwork (1964) by Max Dupain, State Library of New South WalesSydney Opera House

One of the pedestals that ground the ribbed arches that form the shells, Max Dupain, State Library of New South Wales, 1963, From the collection of: Sydney Opera House
Show lessRead more
Workers in front of a pedestal and side shell, Max Dupain, State Library of New South Wales, 1964, From the collection of: Sydney Opera House
Show lessRead more
Side shell under construction, Max Dupain, State Library of New South Wales, 1963, From the collection of: Sydney Opera House
Show lessRead more
Job 1112 (abridged), Arup and New South Wales Government, 1968, From the collection of: Sydney Opera House
Show lessRead more

A brief excerpt from the beginning of the 1968 film, documenting the construction of Sydney Opera House.

Side shell arch segments stored beside the crane track (1964) by Max Dupain, State Library of New South WalesSydney Opera House

The ribs being set in place with crane and erection arch (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Building the Opera House was truly an exercise in working at “the edge of the possible”, as Arup engineer Jack Zunz described it. Individual rib components could not exceed 10 tons, as this was the maximum lift capacity of the three French cranes, at the time the strongest in the world.

Solutions to problems, which by today's standards would seem dated, were at the time inventive and completely novel. One of Arup’s engineers wrote a computer program that would help the surveying engineers accurately track the placement of the elements in space against their calculations. These calculations were done each night by General Electric computers and the results delivered back to the building site the following morning for the engineers to evaluate. At the time, this was indeed “the edge of the possible”.

Aerial view of the construction site looking north onto Sydney Harbour (1964) by Max Dupain, State Library of New South WalesSydney Opera House

The shells were constructed by Hornibrook Group Pty Ltd during Stage Two. Having developed a method of production that resulted in this on-site factory, Hornibrook manufactured the 2400 precast ribs and 4000 roof panels.

As Utzon reflected: “Initially, no definite geometry for the shells had been established, but, as work progressed, the shells were developed according to a spherical geometry and we suddenly had a common denominator, the same spherical surface to deal with, with a similar curvature throughout. This was an elegant solution to construction ... Now the shells could be sub-divided into ribs, which again could be divided into smaller elements, which could be cast within formwork representing the largest rib-entity. Thus it was possible to pre-cast the concrete-shells in smaller pieces and assemble these pieces on location.”

Job 1112 (abridged) (1968) by Arup and New South Wales GovernmentSydney Opera House

This excerpt describes how the method of construction was closely integrated into the design of the shells, and how computers were used to calculate the points in space that the various elements of the ribs would need to accurately occupy.

Aerial view during construction of Stage Two (8) (1965) by State Library of New South WalesSydney Opera House

Formwork in action producing the rib elements for the vaulted shells (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Metal frame of a rib element is lowered into the main formwork (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Formwork used to create the ribs of the vaulted arches of the roof shells (1964) by Max Dupain, State Library of New South WalesSydney Opera House

Preparing the formwork for the next pour of concrete (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Concrete is flowed into the formwork to create rib elements (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Prepped moulds and formwork ready final pouring (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Finished rib elements are lifted out of formwork (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Job 1112 (abridged) (1968) by Arup and New South Wales GovernmentSydney Opera House

This excerpt describes the process of transporting and fitting the rib segments from the formwork to their final positions.

Workers prepare a rib element for elevation into place by one of the three Babcock-Weitz G 280 B cranes (1965) by Jørn Utzon, State Library of New South WalesSydney Opera House

Workers and engineers fit a final piece of a rib (1965) by Jørn Utzon, State Library of New South WalesSydney Opera House

Fitting a rib element in place (1965) by Jørn Utzon, State Library of New South WalesSydney Opera House

A Hornibrook crane lifts a rib piece to the top of the podium (1965) by Max Dupain, State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (13) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (9) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (10) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (11) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (9) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (6) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (3) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (7) (1965) by State Library of New South WalesSydney Opera House

Aerial view during construction of Stage Two (4) (1965) by State Library of New South WalesSydney Opera House

Job 1112 (abridged) (1968) by Arup and New South Wales GovernmentSydney Opera House

This excerpt describes the intricate job of the engineers who survey the position of each segment from different locations around the site and harbour. Physical positions were compared with positions calculated by computer.

The end of a working day (1964) by State Library of New South WalesSydney Opera House

The end of the working day.

Credits: Story

Created by Sam Doust and the
Sydney Opera House GCI Team

________________________________


Contributors:
State Library of New South Wales

Credits: All media
The story featured may in some cases have been created by an independent third party and may not always represent the views of the institutions, listed below, who have supplied the content.
Explore more
Related theme
Performing Arts
Step on stage with the world’s most amazing performers and immerse yourself in 360º shows.
View theme
Google apps