Building a Milwaukee Icon

Explore the legendary campus that remains Harley-Davidson's headquarters through this look at how the Juneau Ave. factory developed from 1906 through the 1920s.

Work continues on (1912) by Harley-Davidson Photo StudioHarley-Davidson Museum

"During the past five years the Harley-Davidson Motor Company has had a new building under construction practically all of the time. As soon as one was finished another was started. While the contractors were finishing the upper floors the lower floors were being used for manufacturing.” — The Harley-Davidson Dealer, January 1913

Work starts on the brick addition (1908) by Harley-Davidson Photo StudioHarley-Davidson Museum

Beginnings

The Harley-Davidson Motor Company began in a small shed behind the Davidson family home  in Milwaukee, Wisconsin. In 1906, the founders built a one-story factory one block north (pictured, right) on Chestnut Street. As multiple additions struggled to keep up with demand, that first factory was absorbed by the larger buildings that stand on the Juneau Avenue site today. (Chestnut Street became Juneau Avenue in 1931.)

Ground Plan, Harley-Davidson Motor Company (1918) by Federal Engineering Co.Harley-Davidson Museum

Completed Factory Site Overview

Harley-Davidson has continuously occupied its original factory site since the buildings were first constructed. By 1918, the familiar red bricks of what is now Harley-Davidson’s corporate headquarters were in place. The functions have changed over the past century, but the buildings remain intact, a testament to the vision of the company’s founders.

Isometric Drawing, Harley-Davidson's Juneau Avenue Campus (2019) by Harley-Davidson Brand MarketingHarley-Davidson Museum

3-D rendering of the sequence of buildings built on Harley-Davidson's Juneau Avenue campus.

South facade, Buildings No. 3 and 4 (1911) by Harley-Davidson Photo StudioHarley-Davidson Museum

1910 Construction

The first buildings of a new modern factory were completed in 1910. The new five-story, brick structure, built in two stages and identified as Buildings No. 3 and 4, soared over the earlier factory. Those two original buildings (to the right) would be gone within three years, making way for larger additions.

Building No. 4, South Elevation (1910) by Hirschberg-Williams-Washburn Co., A.C.Eschweiler, Assoc. Arch.Harley-Davidson Museum

Our Beautiful New Factory

The Motor Company focused on “providing the best possible working conditions for its employees” in constructing its new factory. The design incorporated plenty of windows to provide ample light and ventilation, and numerous details to make the building “absolutely fireproof.” The founders hired renowned Milwaukee architect A.C. Eschweiler to develop the plans.

Workers in the factory tool room (1913) by Harley-Davidson Photo StudioHarley-Davidson Museum

The tool-making department featuring automatic screw machines.

Workers fabricating fuel tanks (1915)Harley-Davidson Museum

Workers fabricating fuel tanks in an environment designed to be full of natural light and fresh air.

Building No. 5, Second Floor Plan (1912) by Federal Engineering Co., A.C. Eschweiler Assoc. Arch.Harley-Davidson Museum

Building No. 5

The increasing number of women within the work force had a concrete impact on the factory. When this building was constructed, the company included a large “Girls’ Rest Room,” then a relatively uncommon feature for Milwaukee factories.

Workers assembling roller bearings (1920) by Harley-Davidson Photo StudioHarley-Davidson Museum

The Milwaukee Leader reported in 1912 that the permit for this building included a restroom, dining room, and a modern kitchen for the stenographers and other female employees.

Arthur Davidson and Sales Office staff (1912) by Harley-Davidson Photo StudioHarley-Davidson Museum

Men and women at work in the Advertising and Sales Department. One of the four founders and vice president of the company, Arthur Davidson (bottom left) was also the sales manager.

Building No. 5, Second Floor Plan (1912) by Federal Engineering Co., A.C. Eschweiler Assoc. Arch.Harley-Davidson Museum

Why That Shape?

Even as the factory was under constant construction, Harley-Davidson® motorcycle sales tripled between 1910 and 1912. The founders employed a variety of means to keep up the manufacturing pace. The shape of Building No. 5 reflects one unique solution: the company purchased the nearby Buchman Mfg. Co. factory, moved the entire building to an interior location, and made it operational while they built around it.

Factory construction around relocated building (1912) by Harley-Davidson Photo StudioHarley-Davidson Museum

The Buchman Mfg. Co. building was originally located at 37th and Chestnut (next to the pre-1910 factories). In March 1912, it was moved approximately 100 feet to the north of its original location to make way for Harley-Davidson's new Building No. 5. The L-shaped construction of this factory addition allowed plenty of natural light from all sides. As soon as the addition was completed, the Buchman building was torn down to make room for a rear receiving yard to accommodate wagon shipments.

Third floor of Building No. 6 construction (1912)Harley-Davidson Museum

Building No. 6

The second new factory addition of 1912 occupied the space upon which the first factory was built (adjacent to Building No. 3 with the Bar and Shield logo). Commenting on the incredible growth in motorcycle sales, the company’s new publication, "The Harley-Davidson Dealer," noted “…the entire factory used by the Harley-Davidson Motor Company in 1908 has now been torn down to make room for a larger structure. No better example has come to our attention to demonstrate the importance and the permanency of the motorcycle industry.”

Building No. 6 construction (1912) by Harley-Davidson Photo StudioHarley-Davidson Museum

Construction on Building No. 6 began in October and was completed by December 1912. The work was accomplished by crews working day and night to complete the reinforced concrete structure on time. "Busy is no name for it around here this season." — The Harley-Davidson Dealer, October 1912

Building No. 7 construction (1913) by Harley-Davidson Photo StudioHarley-Davidson Museum

Bridging
the Gap, and the Railroad

The 1913 factory addition (Building No. 7) completed the wedge-shaped building that commands the site today, bridging the gap between segments built over the past three years. This final section included a north-side dock and elevator directly connected to the shipping and receiving areas. The proximity to the railroad line was critical to the factory operations, bringing in materials and shipping out completed motorcycles.

Junction of Buildings No. 7 and 5 (1914)Harley-Davidson Museum

Wagons in the rear receiving yard delivering materials and hauling crated motorcycles.

Building No. 8, Photographer's Studio (1913) by Federal Engineering Co.Harley-Davidson Museum

Building No. 8

In 1913, Harley-Davidson built a spacious photo studio on the factory roof. The location, with a large wall of north facing windows, let in ample amounts of natural light—perfect for product photography. Upon its completion, Harley-Davidson boasted of having “the most completely equipped commercial photograph studio and darkrooms west of New York City.”

Construction of photo studio on roof of Building No. 5 (1913) by Harley-Davidson Photo StudioHarley-Davidson Museum

Construction of rooftop photo studio showing the location where large windows on the north side would be installed. The smaller brick structure in the background contained a dark room with sinks and a printing table, and a workroom with an enlarging table.

Photography session in progress (1916) by Harley-Davidson Photo StudioHarley-Davidson Museum

A man sitting on a motorcycle with a woman in the sidecar being photographed in the photo studio. The Motor Company used the medium of photography extensively as a sales tool to promote the benefits of the motorcycle in work and recreation.

General Plan, Basement (1915) by Federal Engineering Co.Harley-Davidson Museum

Industrial Necessities

The operations of the growing Harley-Davidson factory required tens of thousands of gallons of gasoline, fuel oil, and lubricating oil. Huge tanks were sunk on the factory grounds to store these vital fluids. Also buried within the structures were the boilers that generated steam for heat and power. A complex system of pipes and tunnels kept the right things flowing to the right places.

Moving Boiler (1913) by Harley-Davidson Photo StudioHarley-Davidson Museum

Boiler being lowered into location in factory basement. The boiler arrived by a flat train car on the side track, loaded on to a 6-horse drawn wagon, and brought around to the south side of the property where it was lowered into the basement of Building No. 5.

Moving Oil Tank (1912) by Harley-Davidson Photo StudioHarley-Davidson Museum

10,000-gallon engine oil tank being moved into receiving yard behind Building No. 5.

Automatic Shop, view from the southwest corner (1918) by Harley-Davidson Photo StudioHarley-Davidson Museum

Expansion—Building No. 9

Factory construction took a break after the feverish schedule of 1910-1913. The company spent a few years consolidating and refining operations before breaking ground on a building to house a new breed of “automatic machines.” Manufacturing technology was evolving quickly during this period, and machines were now automating some formerly manual operations. This 1918 building was thus referred to as the “Automatic Shop.”

Workers tending "automatic" gear-cutting machines (1919) by Harley-Davidson Photo StudioHarley-Davidson Museum

Workers tending "automatic" gear-cutting machines. Inside the space, a traveling crane unloaded raw materials at the delivery platform and transported it by overhead track to the very spot it was needed. The building was "a very fine example of the way a building should be arranged where heavy machinery is used and where heavy raw materials are handled." — The Harley-Davidson Enthusiast™, June 1918.

Building No. 11 construction (1920)Harley-Davidson Museum

Building No. 11

Construction of the six-story Building No. 11 on the south side of Chestnut Street (now Juneau Avenue) in 1920. The photo was taken across Highland Boulevard. The large house to the right of the construction site was used as the Harley-Davidson Sales School.

Harley-Davidson Factory Campus (1928) by Pohlman StudiosHarley-Davidson Museum

Completing the Second Factory Complex

By 1921, the construction of the Juneau Avenue factory campus as we know it today was largely complete. Three smaller building projects between 1921 and 1926 would fill out the factory and bring Harley-Davidson’s building boom to a close.

Harley-Davidson factory in marketing (1921) by Harley-Davidson Motor CompanyHarley-Davidson Museum

Depictions of the completed factory were used in marketing materials, including this spread in The Harley-Davidson Enthusiast™ magazine. The company publications had shared detailed campus construction updates within their pages.

Note: This stylized rendering does not represent the actual factory accurately: the east side of main building is larger, and Building No. 11 comes right up to Highland Avenue, among other liberties taken.

Modern view of the H-D campus looking west (2003) by Brad ChaneyHarley-Davidson Museum

Today

Construction through the 1910s created the buildings that today, a century later, remain the proud home of Harley-Davidson. Motorcycle production at Juneau Avenue ceased in 1973, and the buildings were converted to serve as an expanded corporate headquarters. In 1994, they were added to the National Register of Historic Places. These historic structures are a visible, active tie to Milwaukee’s proud industrial heritage.

Tap to explore

The visitors' entrance to the Juneau Avenue location remains the same as it was in 1912 with modifications to signage and lighting. Explore the campus as it appears today with Google Street View.

Building No. 11 (1919) by Federal Engineering Co.Harley-Davidson Museum

Large-scale drawings that can be inexpensively reproduced are required to coordinate the work of contractors in building construction. Those utilized over decades of design and revision of the Juneau Avenue factory range from the familiar blueprint to the less common Van Dyke brown print displayed here. Over 1,300 sheets gradually accumulated in the files of Harley-Davidson’s facilities staff. They were transferred to the Archives in 2018 to preserve this important chapter of the company’s history.

Credits: Story

Harley-Davidson Museum
Harley-Davidson Archives

Credits: All media
The story featured may in some cases have been created by an independent third party and may not always represent the views of the institutions, listed below, who have supplied the content.
Explore more
Related theme
Milwaukee: Fiercely Independent, Wholly Unexpected
From custard to contemporary art, murals to Lake Michigan
View theme
Home
Discover
Play
Nearby
Favorites